
Hammock Gear · Tarps
Hammock Gear The Journey Tarp
Specs
| Denier | 210D |
|---|---|
| Packed size | 8.5" x 5" x 2.5" |
Description

Lightweight and durable with minimal stretch, the silicone-impregnated ripstop polyester fabric of the Hammock Gear Journey Tarp will keep you out of the elements.
This durable, ultralight backpacking tarp system with doors is both water- and windproof, and resists the retention of water much better than traditional nylon tarps and tents. Reinforced with 210D Polyester, all tie-outs are built with grosgrain featuring 1/2" Beastee D-Rings on the 6 perimeter tie-outs, four door tie-outs, four panel pull-outs, and 3/4" Beastee D-Rings on the ridgeline tie-outs.
Note: The four diamond panel pull-outs require seam sealing (kit included). Many find that seam sealing the ridgeline of the tarp is not necessary, but it is recommended.
Features:
- Reinforcement panels at high-stress areas
- Front wings provide storm coverage while pitching taut at a range of heights
- Silpoly is hydrophobic, meaning that it is made from nonpolar molecules that repel water. Combined with an additional waterproof sealing, it can be quite effective against heavy rainfall.
- Does not sag or stretch when wet
Includes:
- The Journey Tarp
- Seam Sealing Kit
- Stuff Sack
_______________________________________________
Specs
Capacity: 1 hammock
Doors: 4
Weight: 16.37oz | 464g
Dimensions:
- Ridgeline Length: 11ft (132") | 335.3
- Baseline Length: 78" | 198.1cm
- Footprint Width: 111" | 281.9cm (measured from the middle of the baseline)
- Packed Size: 8.5" x 5" x 2.5" | 21.6cm x 12.7cm x 6.4cm
Tie Outs: 4 corners, 2 center, 4 doors, 2 ridgeline, 4 panel pullouts
Needed for Set Up: NOT Included
- Guylines
- Minimum of 8 Stakes
Materials:
- Fabric: 20D Silpoly (silicone-impregnated polyester), 1.1oz/yd²
- Tie-out reinforcements: 210D Polyester
- Hardware: 1/2" and 3/4" D-Rings
Made in the U.S.A.
Based in Columbus, OH | Est. 2009
***Discounts are not available on Hammock Gear products.