High Tail Designs
Prototype - TX50 Rain Mitt "Topo"
Specs
| Dimensions | 11.4" x 7.4" |
|---|
Description
Items made to order | Usually ships in 2-5 business days | Based in Philly | Est. 2018
These are White Topographic colorway mitts with TX50 palms instead of the usual Dyneema Hybrid palms. The rest of the mitt is made from DCF as usual.
*Due to dye-sublimation, colors may vary slightly.
Designed, printed and sewn in Philadelphia, PA
Pattern by Caman "Bones" Skelton
Care Instructions: Clean dust and dirt from Mitts before storing. Store out of direct sunlight and moisture.
Hand wash with a gentle soap.
Do not iron.
Do not wring.
Drip-dry in shade.
Do not bleach.
Specs:
Dimensions:
Sm/Md: ~ 11.4" x 7.4"
Lg/Xl: ~ 12.2" x 7.5"
Sizing: These mitts are meant to go over liner gloves. They will work without them but are much more comfortable and warm if using a liner glove. They may fit a little large if not using liners. Measure from the base of your palm to the tip of your middle finger. This is the base measurement we use for sizing. A Sm/Md size will fit most people with a base measurement of 6.5" - 7.75". A Lg/Xl size will fit most people with a base measurement of 7.5" - 8.25".
Weight:
Sm/Md: 1.07 oz / 30 grams
Lg/Xl: 1.21 oz / 34 grams
Materials:
Sublimated 3.3 oz/sqyd Challenge Sailcloth TX95
Sublimated 1.43 oz/sqyd Dyneema Composite Fabric
3M 9471LE Dyneema Tape
1/8" Shock Cord
1/2" Firm Nylon Grosgrain Ribbon
2 mm Neon Yellow Spectra Glove Pull
Cord Toggle
Cord Pull
Features:
Extremely Water-Resistant (as close to waterproof as you can get without welded seams)
Abrasion-Resistant Palm (to prevent deterioration while using trekking poles)
One-handed wrist cinch fastener to tighten/loosen each mitt
Fully-Taped Seams
Large glove pull on each mitt for ease of donning
Shock cord wrist cinch to prevent water ingress
Loops for attaching mitten hooks
Unique Colorways
Ultralight Construction